BRAKE LINE & FITTINGS REPAIR KIT 2 METRES 1000 PSI NYLON HYDRAULIC HOSE

GO KART BRAKE LINE & FITTINGS REPAIR KIT 2 METRES 1000 PSI NYLON HYDRAULIC HOSE

Nylon High Pressure Brake Line with four matching high pressure brake fittings. 

These fittings are made to couple to the 6mm brake line supplied.

There are two 90 Degree elbows designed to swivel for perfect hose alignment.

This means when you screw the 1/8 BSP threads into the caliper and Master Cylinder you can tighten them until they are correctly sealing on the threads.

We recommend you assemble these screw in fittings using a Hydraulic thread locking solution (Loctite)

The T Piece allow you to connect both sides of the Master Cylinder to a single Master Cylinder pump unit.

Use a sharp knife and ensure that you make a clean cut at right angled to the nylon hose.

These fittings are designed to seal 100% by pushing it over the fitting spigot.

Then firmly tighten the M12 Nut over the outside of the hose.