GO KART 100CC EXHAUST SPACER MADE TO YOUR SIZING 30MM TO 140 MM SNUG FITING

GO KART 100CC EXHAUST SPACER MADE TO YOUR SIZING 30MM TO 140 MM SNUG FITING

  • $16.99
    Unit price per 


GO KART 100CC EXHAUST SPACER MADE TO YOUR SIZING 30MM TO 140 MM SNUG FITTING

 

If you have a problem getting an exhaust spacer to make a neat sealed fit between the exhaust mouth and the spacer? I am with you. I found it near impossible to find the Exhaust Flex that would fit neatly into the pipe. I also had the trouble of keeping the overall pipe length exactly what I needed.

You know how we say there is horsepower to be had if you seal up the pipe system?

Well, this spacer is the heart of that sealing process

So I talked to Mr. Peter MacDonald from Powermac Mufflers. He shared my concerns. Peter took up the challenge to make a joint suitable for the pipe and header that would solve our problems. That's right. Powermac chose to come up with a solution to the many requests to make the right spacer to do the job properly. He told me that the problem using solid spacers or flex was that they are measured on the ID, Yes the inside diameter. And that the sizes varied so much. Because he had to decide what outside size was needed for the AKA pipes he was contracted to produce he adopted a standard that he knew was available.

Peter then went to his Stainless Steel producer and paid them to make exactly the right size outside diameter to suit the standard pipe mouth. I now thank him for a great solution. And outcome to our long time spacer problem. Solving this small but very important piece to out engine needs does complete the package.

If you have the best header available it would have been made by Powermac specifically for your engine. You could say a perfect match. I know that we all must use the Powermac Exhaust Pipe for AKA racing in Australia. So all that is needed to complete this lovely match up is this Stainless Steel Spacer Piece.

 

Check out the Bullet Points below that indicate the best features and what it does.

  • Designed, tested and manufactured by the approved pipe maker, Powermac.
  • A spacer unit made from the best heat dissipating Stainless Steel Tube.
  • Available here for KTS or KTJ engines .
  • The smooth outer finish is processed to ensure a high degree of roundness.
  • This will guarantee a nice snug fit into you new or good conditioned muffler.
  • Do you need a spacer that will almost eliminate leakage?
  • You will only get a better seal by using a high temp. sealant and Hi-temp. bandage.
  • This spacer will improve the reflected wave efficiency.
  • Available here in length 170mm for your engine able to be cut to your size.
  • Do you want the best power output from your engine?